Paint Factory Blackboard Black Spray Paint
Quick-drying and hard-wearing blackboard paint
Dries to a satin finish
Easy to apply and long-lasting
For use with traditional chalks
2 x 200ml
Preparation
Surface should be clean, dry and free of loose debris, dirt, rust, oil, grease. Patch test on an inconspicuous area to ensure suitability and allow to dry.
Directions
Use only as directed. Spray outdoors or in a well-ventilated area. Ensure the can is at room temperature before use. Avoid spraying in cold, damp, humid or windy conditions. Cover adjacent areas. Shake the can in a side-to-side “whisking” motion for 2 minutes prior and occasionally whilst in use to ensure uniformity and prevent clogging. Spray the can upright, 25-30cm from the surface using a smooth side-to-side motion. Build up coats with several thin layers, allowing approx. 20-30 minutes between each coat. After application touch dry in approx. 30 minutes and leave at least 24 hours to fully dry.
Testing The Product
Patch test on an inconspicuous area first to determine the suitability of this product.
Cleaning
To prevent clogging for future use, clear the nozzle by turning the can upside down, then spray until the nozzle is clear. Additionally, remove the nozzle and soak in thinners.
Storage
Store in a cool, dry ventilated place. Avoid direct sunlight. Protect from frost and moisture.
