BOND IT SILICONE SEALANT REMOVER is a non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or counter tops.
Features & Benefits
Readily digests silicone.
Non-drip – can be used horizontally or vertically.
Contains no halogenated solvents; safe low odour formulation.
Minimal hazard rating – all active substances are biodegradable.
Does not contain dichloromethane.
Water clean up.
Ready for use.
Uses
SILICONE SEALANT REMOVER chemically digests cured and uncured silicone elastomers and polymers, leaving their remnants easy to rinse away with water or solvent. Should be used to remove old silicone sealant during renovations. It is suitable for use on brick, concrete, PVCu, melamine laminates, acrylic, uncoated aluminium and its alloys, copper and its alloys, iron and steels, glass and ceramics, epoxy composites without adverse effect. Has little impact on rubber and non silicone elastomers or most painted surfaces, however it is advisable to always test a small area before use.
Coverage
1 cartridge should be enough to remove 5m of silicone bead.
Colour
Amber/brown in colour.
Size
125ml plastic cartridge.
Shelf Life
Minimum 12 months from date of manufacture, when stored in original, unopened cartridges.
Storage Conditions
Store in cool, dry conditions at a temperature between +5C and +25C. Protect from frost and direct sunlight.
