BARTOLINE LIGHTWEIGHT FILLER is an easy to apply high-tech ready-to-use lightweight filler suitable for a multitude of tasks around the home and workplace. Utilising ultra-modern glass bead technology it outperforms most other conventional fillers. When filling large cracks and gaps there is no need to build layers, as no sagging or shrinkage will be evident, even on ceilings.
Dries brilliant white with a perfectly smooth finish requiring NO sanding. Product may be overpainted in approximately 30 minutes. Suitable for interior or exterior use on all surfaces except plastics and metals. Not suitable for fixing structural bolts.
Directions
Preparation
For best results brush out loose material and dust from crack or hole to be filled. Hairline cracks should be slightly enlarged to ensure good filler penetration. Moisten absorbent surfaces with water. Touch in nail and screw heads with an oil-based paint to prevent rusting.
Application
Do not use externally when rain is imminent. Ensure surfaces are clean, dry and dust free. Use direct from tub with a filler knife or spatula. Add a drop of water if the product appears too dry. Press firmly into cavities and smooth over surface and allow to dry. Although not normally necessary, the product may be sanded if required. When used externally protect the filled area from rain and water during setting, then seal with an oil-based paint to protect from weathering. Use only in ambient temperatures above 5⁰C.
Cleaning & Storage
Replace lid firmly and store in a cool, dry place, not below 5⁰C. Clean tools with water. PROTECT FROM FROST.
