Auto Extreme Professional Spray Paint is suitable for interior and exterior application, quick drying, gloss finish, petrol resistant, non-cracking and provides excellent coverage and adhesion with no CFCs.
Preparation
Surface should be clean, dry and free of loose debris, dirt, rust, oil, grease. Surface may need sanding prior.
Directions
Use only as directed. Spray outdoors or in a well-ventilated area. Ensure the can is at room temperature before use. Avoid spraying in cold, damp, humid or windy conditions. Cover adjacent areas. Shake the can in a side-to-side “whisking” motion for 2 minutes prior and occasionally whilst in use to ensure uniformity and prevent clogging. Spray the can upright, 25-30cm from the surface using a smooth side-to-side motion. Build up coats with several thin layers, allowing approx. 20-30 minutes between each coat. After application touch dry in approx. 30 minutes and leave at least 24 hours to fully dry.
Cleaning
To prevent clogging for future use, clear the nozzle by turning the can upside down, then spray until the nozzle is clear. Additionally, remove the nozzle and soak in thinners.
Storage
Store in a cool, dry ventilated place. Avoid direct sunlight. Protect from frost and moisture.
Caution
When dry sanding, wear a suitable face mask and avoid dust inhalation. Special precautions should be taken during surface preparation of 1960’s paint surface over wood and metal as they may contain harmful lead.
Testing The Product
Patch test on an inconspicuous area first to determine the suitability of this product.
Safety Device Fitted
There may be a safety device fitted that prevents the nozzle depressing and releasing spray. If this is the case, carefully remove the nozzle then using a slotted screwdriver, prise off the disc and replace the nozzle.
